Italy is one of the major industrial economies of the EU, with distribution centres, agri-food cold chain and mechanical and automotive manufacturing driving most steel structure demand. Italy sits in a seismically active belt, with higher requirements in the centre and south, and NTC 2018 sets clear rules for steel systems and connections; the northern Alps also require snow consideration. Entering Italy requires design to NTC 2018 / Eurocodes and EN 1090-1 execution class with CE marking.
Seismic requirements in Italy
NTC 2018 is the mandatory technical code for Italian building design, with seismic design taken from site class and seismic zone values; steel satisfies seismic demand through ductile systems and a clear load path. Compared with concrete, steel is lighter and more ductile — a clear advantage in seismic zones — and is also quick to erect after shop fabrication.
- Seismic action and drift requirements per NTC 2018, with ductile connections and bracing
- Material commonly S235 / S355 series to European standards with 3.1 / 3.2 certificates
- Long-span logistics centres commonly use portal frames with high-bay racking and loading docks
Codes, snow and corrosion
Design follows EN 1993 with Italian National Annexes and loads follow EN 1991; components entering the market are produced to EN 1090-1. Italy's climate varies strongly north to south: snow is heavier in the northern mountains, while coastal and industrial areas need a C3–C4 corrosion environment.
- Snow/wind: values from the project region, with correspondingly enhanced roof and cladding fixing
- Corrosion: C3 inland and C4 coastal or industrial, hot-dip galvanised or galvanised plus coating
- Fire: coatings or boards to Italian fire resistance requirements for the building use
- Cladding: insulation and waterproofing for the local climate, with airtightness
Delivery and logistics: Shanghai / Ningbo to Genoa, Trieste
Detailing and fabrication take place at our Shanghai and Jiangsu facilities; knocked-down members ship from Shanghai or Ningbo to Genoa and Trieste with marking drawings, packing lists and erection guidance.
- Detailing 7–10 days, fabrication 25–40 days, ocean about 30–38 days
- Production to EN 1090-1 EXC2 / EXC3 with factory production control (FPC) documents
- High loading density: fewer containers per tonne and lower unit freight cost
Frequently asked questions
Can you issue calculations to NTC 2018?
What does a seismic zone require of a steel structure?
Who handles site erection?
Send the span, use and site conditions — we reply with a structural solution and budget price within 48 hours.
Enquire now Browse all products